Відео

is it have a CT to avoid to feed the grid?

Very good video, thanks a bunch for explaining the procedure for getting one of these eunit online! 😅

Honda 1332AT. Can’t go wrong.

So I just built a similar set up just not a Cub. I can see the limitations of the mechanical lift and rotate. I don't expect I'll see deep snow like this in Colorado except for drifts. I am keeping an eye out for a cheap but powerful hydraulic set up for the future. I've only got about $320 in the tractor and blower before the knobby tires, wheel weights, and washer fluid for ballast were added. Best to look for these in the off season.

Activation key ? 12312312 does not work!

Thank god I found this video. I was hooking up a LAN connection to my inverter and messed up something in the settings. I think I put it to “pair up” with my dc switch off so it wasn’t linking to my panels anymore. Thank you for making such a detailed step by step guide. You saved me at least $100 if not more to have someone come out to fix my stupid mistake.

Hey Hullspeed, I don't know if you're still reading this but ANOTHER episode of Fast Forward has been located. It was posted by another archivist who has lots of PBS recordings from Boston. This appears to be "episode II" which the PBS station was calling "Fast Forward II." It's an extremely good copy, too. So good that I suspect it is from an original master and NOT broadcast quality. ua-cam.com/video/dIrGXYuudZA/v-deo.html

hi Rich its Owen on my dad's computer he he he ;)

I really appreciate you uploading this video. It helped me a lot today at work

After plowing *(pushing) snow for 60yrs, I became disabled and at the same all of my snow plows were down, so I bought a snow blower. We had a lot of snow that year, JAN 2014, and when I got to Menard's they only had one left and it was a floor model. It cost $700 which seemed like a lot, but it was a 7hp 2 stage with a light and 125volt electric start. There are only 2 problems with it, 1). The Carburetor has always required the choke to be on around 40-50% to stop the hunting. And 2). The primer bubble has stopped working altogether. But, redeeming factors are It has that 125volt starter and the light on the handle so I can use it at night. I have put that thing thru some hellish drifts like all of 2 feet deep, and slush from the county salting the road and plowing a huge glob into my driveway. To me it's a champion! So, I'm gonna drill out the main jet to fix the hunting, and maybe change the oil this year. I already ran a tube from the outside into the inlet of the carb for shooting starting fluid into it, so it starts right up now. * I have 3 pickup trucks w/ front plows and 4 tractors w/ rear blades. Only 1 works, a 1967 Massy Ferguson 165, but it's so big and it's a Diesel. One of these days I'm gonna...........ben/ michigan

You needed. Some chains an. Wheel weights. Make. A lot of difference.

ua-cam.com/video/76mjPtziYug/v-deo.html

Why is it moving so slow?

Se puede usar sin los optimizadores

0:00 this my tv ocean waves, when I go to 🛌 sleep

Nic yor jab .tankssssssss.

I might have missed it, did you have the breaker to the grid off during the pairing process?

thats an old video but i am gonna give it a try and ask. i have a 40 panels with 40 optimizers ofc. whats the voltage i should be getting when measuring straight on the string + - cables? should it be 40v regardless if it is a sunny day or not OR something like 700-800v ? please get back to me if you see this because i have a problem with my system.

I have a cub 30” snowblower that thing eats I’d like a cub 3000 series to move snow or something like yours that’s awesome

There are days i miss winters like this especially now that i have kids.

I expect this mower will last several seasons with decent care. ua-cam.com/users/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.

Thanks so much. Just used your method on badly etched glass and worked fine. It does take time. Lots of time. Tip: Once the polish pad is loaded with the cerium oxide, just add water to glass to release paste again. You can keep doing that many times without addind add'l powder. Did I mention it takes quite a while to get clear glass again?

2:46

Did you have to establish ethernet/wfi communication first?

Are glaciers affected by hurricanes and/earthquakes?

Just another Cub saving the day...

A surfer??? There’s a surfer there? Around 43…. At first I thought deadwood in the water but then it came back 43:19 and stood up just as he exited stage right! That is one heck of a way to show scale! Crazy ass surfer! 🤙 🏄‍♂️ 👊

I want a helicopter to drop me right about mid plateau with a few blunts, a good supply of water and a beanbag chair with the same weather conditions so I could experience all that raw power first hand. It would be spiritual above and beyond!!!

I love watching these rapidly growing glaciers

I love watching it advance

Amazing landscape!

What model is this machine looking into a 3184 with hydraulics nice machine tho!

Looks great and certainly enjoyable seeing the fire clearly

Does that thing live out there?

Very good put 91 gas on it yeahh

Are you extremely sick of the use of the word extreme?

You sir are a gentleman

Beats the heck out of your wife using a shovel. 🤔🤣

That is some serious snow. I don’t have a blower on mine. Just a plow. I hope it works good

great video, thx. can you tell me if you have to use the optimizers with this inverter?

This is the island where it was filmed Lost World: Jurassic Park?

What’s out for the minimum # of panels the inverter requires.

I'm impressed for a rear wheel drive and no chains. It beats shoveling. And you don't have to pay $15,000 dollars for a 700series Deere which will do a faster job.

I wonder how this applies to the SolarEdge SE7600H-US that doesn't have that digital display like that at least mine doesn't I haven't gotten "permission to operate" yet from my electric company and the company that installed my system hasn't explained to me how my inverters work as far as monitoring goes. I assume it has a built-in Wi-Fi transmitter because when they were installing and setting up my system my project manager was on a tablet setting everything up he had to connect to my home's Wi-Fi to do it.

i like a deere better

I wanted to buy the 10,000w inverter. Will that be enough power to run a 4 Ton Central AC/heat pump unit in a house?? Please let me know when you get a chance. Thanks

I turned 28 about 14 days ago that year

My inverter is on night mode ?? Any input’s on how to get the system to wake up should I factory reset the system

I just Love the way you explain evreything and calm voice, question my inverter went out and ia only 3 years old I do have a warranty but any ideas Why thanksss

Hello🖐️😎 I moved into a shared living house, we (other tenants) pay rent and utilities, so about the power bill I started wondering about the solar panels on the roof (13 panels) and the process of getting them cleaned, searching around I found we have the same unit you show in your video, I have a few questions, now I'm not sure if the current landlord has paperwork on this unit,, anyway when cleaning do you turn the on switch off ,and the Dc switch off?, also if you do, upon turning it back on, do you have to enter passcode etc back in before turning it on?,,also is the passcode the same on all units?